Engineered for extreme environments, this 0.323-inch thick 316 stainless steel stock sheet offers exceptional strength and corrosion resistance for critical pulling and lifting operations. Its robust construction ensures reliability.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.323" |
| Length | 47" |
| Width | 13" |
Specified by design engineers worldwide, this 316 stainless steel stock sheet boasts superior corrosion and pitting resistance, particularly in saline and acidic environments, due to its molybdenum content. The 0.323-inch thickness, 47-inch length, and 13-inch width provide a substantial material base for fabrication of robust lifting points, custom rigging components, and structural support elements in marine, chemical processing, and offshore industries. Its high tensile strength and formability allow for precise engineering of safety-critical assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Plan cutting and forming operations to minimize material stress and maintain structural integrity. 3. Employ appropriate welding procedures for 316 stainless steel, ensuring post-weld heat treatment if required by application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners with 316 stainless steel components. | Always use 316 stainless steel or compatible high-grade alloy fasteners to prevent galvanic corrosion and ensure joint integrity. |
| Inadequate edge preparation before welding. | Ensure clean, properly beveled edges for all welds to achieve full penetration and optimal joint strength. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom lifting lugs and eye plates, Reinforcement plates for rigging hardware, Structural components in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||