This robust 316 stainless steel stock sheet provides exceptional strength and corrosion resistance. Engineered for severe environments, it's the foundational component for custom pulling and lifting apparatus.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.928" |
| Length | 45" |
| Width | 32" |
Built to exacting engineering tolerances, this 316 stainless steel stock sheet offers superior mechanical integrity for critical pulling and lifting operations. Its 0.928-inch thickness, combined with a 45-inch length and 32-inch width, provides a substantial platform for fabrication. The inherent passivation layer of 316 stainless steel ensures excellent resistance to pitting and crevice corrosion in marine and chemical environments. This material's high tensile and yield strength make it suitable for high-stress applications, load-bearing structures, and custom rigging components where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare mounting surface by ensuring it is clean, level, and capable of supporting the intended load. 2. Precisely position the stock sheet according to design specifications, utilizing appropriate lifting equipment. 3. Securely fasten the stock sheet using high-strength, corrosion-resistant fasteners (e.g., grade 8 or higher stainless steel bolts) through pre-drilled or plasma-cut holes, adhering to torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which will corrode and compromise structural integrity. | Always utilize fasteners made from 316 stainless steel or an equivalent high-grade alloy to match the corrosion resistance of the stock sheet. |
| Over-torquing fasteners, leading to deformation of the sheet or stripping of threads. | Consult a torque chart for the specific fastener size and material, and use a calibrated torque wrench. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom winch bases and mounting plates, Heavy-duty anchor points and structural supports, Fabrication of specialized rigging components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||