This 0.793" thick 316 stainless steel stock sheet, measuring 38" x 48", is engineered for critical hydraulic system components requiring superior corrosion resistance and structural integrity.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.793" |
| Length | 38" |
| Width | 48" |
Built to exacting engineering tolerances, this 316 stainless steel stock sheet offers a robust solution for demanding hydraulic environments. The material's inherent properties, including its excellent resistance to chloride corrosion and pitting, make it ideal for high-pressure fluid handling and marine applications. Its precise dimensions of 0.793" thickness, 38" length, and 48" width ensure consistent performance and reliable integration into complex hydraulic assemblies, providing long-term durability and operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish against project requirements. 2. Precisely cut sheet to required component dimensions using appropriate machining techniques. 3. Deburr all cut edges to prevent material fatigue and ensure smooth fluid flow.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel for corrosive hydraulic fluids. | Always specify 316 stainless steel or higher for environments exposed to chlorides or aggressive chemicals. |
| Neglecting edge preparation after cutting. | Thoroughly deburr all edges to prevent stress concentration and potential crack propagation. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Hydraulic manifold blocks, Pressure vessel components, Corrosion-resistant hydraulic fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||