This robust 316 stainless steel stock sheet is engineered for extreme pulling and lifting applications. Its substantial thickness and high-grade material ensure exceptional durability and resistance to corrosive environments.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.781" |
| Length | 42" |
| Width | 16" |
Engineered for reliability and performance, this 316 stainless steel stock sheet boasts a nominal thickness of 0.781 inches, a length of 42 inches, and a width of 16 inches. Fabricated from marine-grade 316 stainless steel, it offers superior corrosion resistance, particularly in saltwater and chemical-laden environments, due to its molybdenum content. This makes it ideal for applications demanding high tensile strength and longevity under significant load stresses, ensuring structural integrity in harsh conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Carefully position the stock sheet, aligning mounting holes if applicable. 3. Securely fasten the sheet using appropriately rated fasteners and torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners with 316 stainless steel. | Always use fasteners made from 316 stainless steel or a compatible alloy to prevent galvanic corrosion. |
| Over-torquing fasteners, leading to deformation of the sheet. | Refer to load charts or engineering specifications for correct fastener torque values to avoid sheet damage. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Heavy-duty lifting points and brackets, Reinforcement plates for structural supports, Custom fabrication for marine and industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||