Engineered for extreme environments, this 316 stainless steel stock sheet offers superior corrosion resistance and exceptional tensile strength for critical pulling and lifting operations.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.775" |
| Length | 29" |
| Width | 33" |
Purpose-built for heavy-duty applications, this 316 stainless steel stock sheet boasts a substantial 0.775-inch thickness, ensuring robust structural integrity under extreme loads. Measuring 29 inches in length by 33 inches in width, the sheet's composition of 316 stainless steel provides unparalleled resistance to pitting and crevice corrosion, even in harsh marine or chemical environments. This material's inherent strength and durability make it ideal for fabricating custom lifting lugs, reinforcement plates, or structural components within heavy machinery and offshore equipment. Its non-magnetic properties further enhance its utility in specific industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material grade against project requirements. 2. Clean all surfaces thoroughly to remove any contaminants. 3. Securely position the stock sheet according to the design specifications for welding or bolting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade stainless steel in corrosive environments. | Always specify and utilize 316 stainless steel for applications exposed to saltwater, chemicals, or high humidity to prevent premature corrosion and failure. |
| Inadequate edge preparation before welding. | Properly bevel and clean edges to ensure full penetration welds, maximizing the structural integrity of the fabricated component. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom lifting point fabrication, Reinforcement plates for heavy equipment, Marine hardware components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||