Engineered for robust performance in corrosive environments, this 316 stainless steel stock sheet offers exceptional strength and durability for critical pulling and lifting operations.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.749" |
| Length | 43" |
| Width | 42" |
Specified by design engineers worldwide, this 316 stainless steel stock sheet features a nominal thickness of 0.749 inches, a length of 43 inches, and a width of 42 inches. Composed of marine-grade 316 stainless steel, it exhibits superior corrosion resistance, particularly against chlorides, and excellent mechanical properties at elevated temperatures. The material's inherent strength and fatigue resistance make it an ideal substrate for custom fabrication of heavy-duty lifting lugs, structural components in marine environments, and specialized pulling equipment subjected to harsh conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against project specifications. 2. Clean surfaces thoroughly to remove any contaminants. 3. Fabricate and install according to approved engineering drawings and welding procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower grade stainless steel in corrosive environments. | Always specify and use 316 stainless steel for marine or high-chloride applications to ensure longevity and prevent premature failure. |
| Inadequate surface preparation before welding or fabrication. | Thoroughly degrease and remove any mill scale or surface imperfections to ensure proper weld integrity and prevent stress risers. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom fabricated lifting points and eyes, Structural components for offshore platforms, Reinforcement plates for heavy machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||