High-performance 316 stainless steel stock sheet, precisely fabricated to 0.675" thickness, 19" width, and 28" length. Engineered for superior corrosion and temperature resistance in critical applications.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.675" |
| Length | 19" |
| Width | 28" |
Specified by design engineers worldwide, this 316 stainless steel stock sheet offers exceptional mechanical integrity and resistance to a broad range of corrosive media, including chlorides and acids. Its 0.675-inch thickness provides robust structural support for high-pressure environments, while the 19-inch by 28-inch dimensions allow for versatile fabrication in demanding temperature control systems. The inherent passivity of 316 stainless steel, due to its molybdenum content, ensures long-term reliability in harsh operating conditions, making it the material of choice for critical components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility and cleanliness before cutting or welding. 2. Utilize appropriate cutting and forming tools designed for stainless steel to prevent contamination and deformation. 3. Employ proper welding procedures and post-weld cleaning to maintain corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or machining. | Always use dedicated stainless steel tools and equipment to prevent cross-contamination and maintain the material's inherent corrosion resistance. |
| Improper post-weld cleaning, leaving residual contaminants. | Thoroughly clean welds and adjacent areas using non-abrasive methods (e.g., pickling, passivation) to restore the protective oxide layer. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: High-pressure vessel fabrication, Heat exchanger components, Chemical processing equipment, Marine and offshore structures, Food and beverage processing systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||