This robust 316 stainless steel stock sheet, measuring 0.675" thick, 14" long, and 17" wide, is engineered for superior performance in extreme pulling and lifting environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.675" |
| Length | 14" |
| Width | 17" |
Built to exacting engineering tolerances, this 316 stainless steel stock sheet boasts exceptional strength and corrosion resistance, ideal for marine, chemical processing, and heavy-duty industrial applications. Its 0.675-inch thickness provides substantial load-bearing capacity, while the 14-inch by 17-inch dimensions offer a versatile platform for custom fabrication and structural reinforcement. The inherent properties of 316 stainless steel, including its enhanced molybdenum content, ensure superior protection against pitting and crevice corrosion, even in aggressive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, level, and capable of supporting the intended load. 2. Precisely position the stock sheet, aligning it with any pre-drilled holes or mounting points. 3. Securely fasten the sheet using appropriate grade fasteners (e.g., high-strength bolts and washers) designed for stainless steel and the specific application's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion and premature failure. | Always utilize 316 stainless steel or other compatible corrosion-resistant fasteners for optimal longevity. |
| Over-tightening fasteners, which can deform the sheet or compromise its structural integrity. | Apply torque according to engineering specifications and fastener manufacturer recommendations, using calibrated tools. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom winch bases, Heavy-duty hoist anchor points, Structural reinforcement in marine environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||