This robust 316 stainless steel stock sheet is engineered for critical pressure and temperature control applications. Its superior corrosion resistance and formability make it ideal for fabrication in harsh industrial settings.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.664" |
| Length | 31" |
| Width | 19" |
Built to exacting engineering tolerances, this 316 stainless steel stock sheet measures 0.664 inches thick, 31 inches in length, and 19 inches in width. The 316 alloy provides exceptional resistance to pitting and crevice corrosion, particularly in chloride-rich environments, due to its molybdenum content. This makes it highly suitable for marine, chemical processing, and high-temperature applications where material integrity under stress and corrosive conditions is paramount. Its excellent weldability and formability facilitate precise fabrication of custom components for pressure vessels, heat exchangers, and control system housings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application and environmental conditions. 2. Ensure all cutting, bending, and joining processes adhere to industry standards for 316 stainless steel. 3. Thoroughly clean and inspect fabricated components for any defects prior to installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can introduce iron contamination and initiate corrosion. | Utilize dedicated stainless steel cutting tools and maintain rigorous cleanliness to prevent cross-contamination. |
| Improper welding procedures leading to carbide precipitation and reduced corrosion resistance. | Employ low-heat input welding techniques and consider post-weld heat treatment if critical corrosion resistance is required. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Chemical processing equipment, Marine hardware, High-temperature ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||