This 316 stainless steel stock sheet offers superior corrosion resistance and strength for critical pulling and lifting applications. Engineered for durability and performance in harsh environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.647" |
| Length | 25" |
| Width | 30" |
Precision-manufactured to tight tolerances, this 0.647-inch thick 316 stainless steel stock sheet measures 25 inches in length and 30 inches in width. Composed of chromium, nickel, and molybdenum, 316 stainless steel provides exceptional resistance to pitting and crevice corrosion, making it ideal for marine, chemical processing, and food handling environments. Its high tensile strength and ductility ensure reliable performance under significant load and stress, suitable for fabricating custom lifting eyes, structural components for winches, and specialized rigging hardware where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the area is clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools (e.g., waterjet, plasma cutter). 3. Deburr all edges thoroughly to prevent snagging and ensure structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always select 316 stainless steel for applications exposed to saltwater, chemicals, or high humidity to prevent premature corrosion and failure. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all cut edges to remove sharp points and micro-cracks that could initiate stress risers or pose a safety hazard during handling and use. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom lifting bracket fabrication, Reinforcement plates for rigging systems, Winch drum components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||