This 316 stainless steel stock sheet offers exceptional corrosion and chemical resistance, making it ideal for critical hydraulic system components. Engineered for durability and performance in harsh environments.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.641" |
| Length | 33" |
| Width | 38" |
Precision-manufactured to tight tolerances, this 316 stainless steel stock sheet measures 0.641 inches in thickness, 33 inches in length, and 38 inches in width. The inherent properties of 316 stainless steel, including its high chromium and molybdenum content, provide superior resistance to pitting, crevice corrosion, and general corrosion, especially in saline and acidic environments. This makes it an optimal choice for fabricating manifold blocks, hydraulic cylinders, valve bodies, and other high-pressure fluid power components where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and condition against project requirements. 2. Carefully machine to final component specifications, adhering to precise tolerances. 3. Deburr all edges thoroughly after machining to prevent particulate contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel for hydraulic systems. | Always specify 316 stainless steel for its superior corrosion resistance and suitability for hydraulic fluids. |
| Inadequate edge preparation after machining. | Thoroughly deburr all cut edges to prevent the introduction of debris into the hydraulic system, which can cause seal damage and component failure. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Hydraulic Manifold Fabrication, High-Pressure Fluid Power Components, Marine Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||