This 0.608-inch thick, 316 stainless steel stock sheet offers exceptional corrosion resistance and superior strength for robust pulling and lifting applications in harsh environments.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.608" |
| Length | 31" |
| Width | 18" |
Precision-manufactured to tight tolerances, this 316 stainless steel stock sheet measures 0.608 inches thick, 31 inches in length, and 18 inches in width. Composed of an alloy with molybdenum, 316 stainless steel provides enhanced resistance to pitting and crevice corrosion, particularly in chloride-rich environments. Its high tensile strength and durability make it an ideal substrate for fabricating custom pulling and lifting hardware, ensuring longevity and performance under extreme loads and corrosive conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess the intended application and required load-bearing capacity. 2. Fabricate custom mounting points or attachment features according to design specifications. 3. Securely integrate the fabricated component into the lifting or pulling system, ensuring all fasteners are properly torqued.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel in corrosive environments. | Always specify 316 stainless steel for applications involving saltwater, chemicals, or high chloride concentrations to prevent premature degradation. |
| Underestimating the required thickness for the intended load. | Perform thorough structural analysis or consult an engineer to determine the precise thickness needed to safely support expected loads and stresses. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom winch plates, Heavy-duty lifting eye fabrication, Submersible equipment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||