This 316 Stainless Steel stock sheet offers superior corrosion resistance and mechanical strength, making it ideal for robust hydraulic systems and demanding industrial environments.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.604" |
| Length | 15" |
| Width | 21" |
A proven choice for industrial professionals, this 316 stainless steel stock sheet (0.604" thickness, 15" length, 21" width) delivers exceptional performance in corrosive environments. The inherent passivation layer of 316 stainless steel, enhanced by molybdenum, provides superior resistance to pitting and crevice corrosion, critical for hydraulic systems exposed to saltwater, chemicals, or high-temperature fluids. Its robust mechanical properties ensure structural integrity under significant pressure and stress, extending component lifespan and minimizing maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut to the required dimensions using appropriate machining techniques. 3. Deburr all edges to prevent stress concentration and facilitate smooth handling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always specify 316 stainless steel for its superior corrosion resistance, preventing premature failure and system contamination. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all cut edges to eliminate sharp points that can cause galvanic corrosion or mechanical damage to seals. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Hydraulic manifold fabrication, Pressure vessel components, Corrosion-resistant fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||