Engineered for superior performance in corrosive environments, this robust 316 stainless steel stock sheet offers exceptional strength and durability for critical pulling and lifting operations. Its precise dimensions ensure seamless integration into your existing systems.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.529" |
| Length | 18" |
| Width | 37" |
Manufactured under strict quality controls, this 316 stainless steel stock sheet boasts a nominal thickness of 0.529 inches, a length of 18 inches, and a width of 37 inches. Composed primarily of iron, chromium, nickel, and molybdenum, it exhibits excellent resistance to pitting and crevice corrosion, making it ideal for marine, chemical processing, and food and beverage industries where exposure to chlorides and acids is common. The material's inherent tensile strength and ductility ensure reliable performance under significant load bearing and dynamic forces encountered in pulling and lifting scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely align the stock sheet with pre-drilled mounting points or designated assembly areas. 3. Securely fasten the sheet using appropriate grade 316 stainless steel fasteners, torqued to manufacturer specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that will corrode. | Always utilize grade 316 stainless steel or higher for all fasteners, washers, and nuts to maintain the integrity of the assembly in corrosive environments. |
| Over-torquing fasteners, leading to material deformation or stress concentration. | Employ a calibrated torque wrench and adhere to specified torque values to prevent damage to the stock sheet and ensure secure, even load distribution. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Structural reinforcement in marine environments, Custom fabrication for heavy-duty lifting equipment, Component in offshore oil and gas equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||