This 0.423" thick 316 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it an ideal choice for critical hydraulic system components and fabrication.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.423" |
| Length | 34" |
| Width | 22" |
A high-performance industrial component, this 316 stainless steel stock sheet measures 0.423 inches thick, 34 inches in length, and 22 inches in width. Manufactured from marine-grade 316 stainless steel, it provides exceptional resistance to pitting and crevice corrosion in aggressive environments, including saltwater and various chemical solutions. This material's superior strength and durability ensure reliable performance under high pressure and demanding operating conditions, making it suitable for fabricating hydraulic manifolds, pressure vessels, and structural elements within fluid power systems. Its non-magnetic properties also contribute to its suitability in specific sensitive applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended hydraulic fluid and operating environment. 2. Ensure all cutting, machining, and welding processes are performed according to best practices for 316 stainless steel to maintain material integrity. 3. Implement proper cleaning and passivation procedures post-fabrication to optimize corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel for corrosive hydraulic applications. | Always specify and use 316 stainless steel, or equivalent, for its enhanced molybdenum content, which significantly improves corrosion resistance. |
| Inadequate cleaning and passivation after fabrication. | Thoroughly clean and passivate the fabricated component to remove any residual contaminants and to form a passive oxide layer, crucial for long-term corrosion protection. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Hydraulic Manifold Fabrication, Pressure Vessel Construction, Corrosion-Resistant Fluid Handling Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||