This 316 stainless steel stock sheet offers superior corrosion resistance and strength, ideal for fabricating robust components for pulling and lifting equipment in harsh environments.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.055" |
| Length | 17" |
| Width | 36" |
Specified by design engineers worldwide, this 316 stainless steel stock sheet (0.055" thickness, 17" width, 36" length) leverages the exceptional properties of marine-grade stainless steel. Its high molybdenum content provides enhanced resistance to pitting and crevice corrosion, making it suitable for marine, chemical, and food processing industries. The alloy's excellent formability and weldability allow for intricate fabrication while maintaining structural integrity under significant tensile and shear loads common in pulling and lifting mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the sheet for cutting and shaping according to the desired component design. 2. Utilize appropriate metalworking tools for precise fabrication, ensuring all edges are deburred. 3. Integrate the fabricated component into the pulling or lifting assembly using compatible fasteners and welding techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel for corrosive environments. | Always select 316 stainless steel for applications exposed to salt water, chemicals, or high humidity to prevent premature corrosion and component failure. |
| Insufficient material thickness for the intended load capacity. | Thoroughly calculate the required material thickness based on the maximum expected tensile and shear forces the component will experience during operation. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom fabricated lifting eyes, Reinforcement plates for winch mechanisms, Components for marine hardware and rigging.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||