Engineered for robust performance, this 316 stainless steel stock sheet offers exceptional corrosion resistance and durability. Ideal for custom fabrication in demanding hydraulic environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.035" |
| Length | 17" |
| Width | 29" |
Built to exacting engineering tolerances, this 316 stainless steel stock sheet measures 0.035 inches in thickness, 17 inches in width, and 29 inches in length. Composed of a minimum of 16% chromium, 10% nickel, and 2% molybdenum, it provides superior resistance to pitting and crevice corrosion, particularly in saline or chloride-rich environments common in hydraulic systems. This material's inherent strength and weldability make it suitable for custom manifold fabrication, valve bodies, and pump housings where reliability under pressure is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all surfaces thoroughly to remove any contaminants. 2. Precisely cut or machine the sheet to the required dimensions for the specific hydraulic component. 3. Weld or fasten the fabricated part according to established engineering best practices for 316 stainless steel, ensuring proper joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel in corrosive hydraulic fluid environments. | Always specify and use 316 stainless steel for its enhanced molybdenum content, which significantly improves resistance to chloride-induced corrosion. |
| Inadequate cleaning of surfaces prior to fabrication or installation. | Ensure all surfaces are meticulously cleaned to prevent contamination that could compromise the integrity of welds or seals in the hydraulic system. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom Hydraulic Manifold Fabrication, Corrosion-Resistant Valve Bodies, Pump Housing Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||