This 316 stainless steel stock sheet, precisely manufactured to 0.719" thickness, offers superior corrosion resistance for critical hydraulic system components. Its robust dimensions (38" x 41") ensure suitability for a wide range of fabrication needs.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.719" |
| Length | 38" |
| Width | 41" |
Built to exacting engineering tolerances, this 316 stainless steel stock sheet provides exceptional performance in corrosive environments typical of hydraulic systems. The material's inherent properties, including high tensile strength and resistance to pitting and crevice corrosion, make it ideal for fluid power applications. The precise thickness of 0.719 inches, combined with a length of 38 inches and a width of 41 inches, allows for efficient fabrication of robust manifolds, pressure vessels, and structural components that demand reliability and longevity under significant pressure and chemical exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Clean the sheet surface thoroughly to remove any contaminants before fabrication. 3. Fabricate components according to approved engineering drawings, ensuring adherence to welding and machining procedures suitable for 316 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower grade stainless steel not suitable for corrosive hydraulic fluids. | Always specify and verify 316 stainless steel for its superior corrosion resistance in hydraulic environments. |
| Improper welding techniques leading to reduced corrosion resistance at weld joints. | Employ qualified welding procedures and filler materials recommended for 316 stainless steel to maintain material integrity. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Hydraulic Manifold Blocks, High-Pressure Fluid Connectors, Corrosion-Resistant Hydraulic Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||