Engineered for extreme environments, this 316 stainless steel stock sheet provides exceptional strength and corrosion resistance for critical hydraulic components. Its precise dimensions ensure seamless integration into demanding systems.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.916" |
| Length | 30" |
| Width | 27" |
Purpose-built for heavy-duty applications, this 316 stainless steel stock sheet offers superior performance in corrosive and high-pressure hydraulic environments. With a robust thickness of 0.916 inches, a length of 30 inches, and a width of 27 inches, it provides ample material for fabricating critical components. 316 stainless steel is renowned for its enhanced molybdenum content, which significantly improves resistance to pitting and crevice corrosion, making it ideal for marine, chemical processing, and high-temperature hydraulic applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material certification against system requirements. 2. Ensure clean, deburred edges prior to machining or welding. 3. Follow standard fabrication practices for 316 stainless steel, considering weldability and heat treatment if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel for corrosive hydraulic fluid compatibility. | Always specify 316 stainless steel for its superior resistance to a wide range of corrosive media common in hydraulic systems. |
| Inadequate edge preparation leading to stress concentrations during fabrication. | Thoroughly deburr all cut edges to prevent premature component failure. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Hydraulic manifold blocks, High-pressure cylinder components, Corrosion-resistant hydraulic fittings and adapters.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||