This 0.790" thick 316 stainless steel sheet offers superior corrosion resistance, making it ideal for harsh environments. Precisely manufactured to exacting standards for critical pressure and temperature control systems.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.790" |
| Length | 39" |
| Width | 43" |
Manufactured under strict quality controls, this 316 stainless steel stock sheet measures 0.790 inches in thickness, 39 inches in length, and 43 inches in width. The inherent properties of 316 stainless steel, including its enhanced molybdenum content, provide exceptional resistance to pitting and crevice corrosion, particularly in chloride-laden environments. This makes it a robust choice for applications subjected to elevated temperatures and pressures where material integrity is paramount. Its low carbon content minimizes carbide precipitation during welding, ensuring continued corrosion resistance in the heat-affected zone.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and shaping tools are appropriate for 0.790" thick 316 stainless steel. 2. Deburr all cut edges thoroughly to prevent stress risers. 3. Follow established welding procedures for 316 stainless steel if fabrication is required, ensuring proper inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to contamination and reduced corrosion resistance. | Utilize dedicated stainless steel cutting tools and maintain separate storage to prevent cross-contamination. |
| Inadequate edge preparation before welding, leading to potential weak points and compromised corrosion resistance. | Thoroughly clean and bevel edges according to industry best practices for 316 stainless steel welding. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: High-pressure vessel fabrication, Heat exchanger components, Corrosive fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||