Engineered for demanding pulling and lifting applications, this 0.546-inch thick 316 stainless steel stock sheet offers superior corrosion resistance and exceptional strength for critical operations.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.546" |
| Length | 39" |
| Width | 28" |
Manufactured under strict quality controls, this 316 stainless steel stock sheet boasts a robust 0.546" thickness, a generous 39" length, and a 28" width. Composed of Austenitic 316 stainless steel, it exhibits excellent resistance to pitting and crevice corrosion in chloride-rich environments, making it ideal for marine, chemical processing, and offshore applications. Its high tensile and yield strength ensure reliable performance under significant loads encountered in pulling and lifting operations, maintaining structural integrity even in aggressive conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly supported to prevent bowing or damage. 2. Accurately mark and cut to the required dimensions using appropriate cutting tools for stainless steel. 3. Securely fasten the sheet using corrosion-resistant hardware suitable for 316 stainless steel, ensuring load distribution is considered.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which will corrode and contaminate the 316 stainless steel. | Always utilize 316 stainless steel or higher-grade fasteners designed for corrosive environments. |
| Improper cutting techniques that can lead to work hardening and reduced corrosion resistance. | Employ sharp cutting tools and appropriate lubrication, and consider annealing if significant deformation occurs. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom fabrication of lifting hardware, Reinforcement plates for winches and hoists, Structural components in marine pulling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||