Engineered for demanding pulling and lifting tasks, this 304 stainless steel stock sheet provides exceptional strength and corrosion resistance. Its substantial 0.831-inch thickness ensures superior load-bearing capacity for critical industrial applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.831" |
| Length | 47" |
| Width | 23" |
Specified by design engineers worldwide, this 0.831" thick, 47" long, and 23" wide stock sheet is fabricated from premium 304 stainless steel. Renowned for its excellent corrosion resistance, high tensile strength, and durability, 304 stainless steel is the material of choice for environments where chemical exposure, moisture, and extreme stress are prevalent. Its non-magnetic properties and ability to withstand a wide temperature range further enhance its suitability for diverse industrial settings, including marine, chemical processing, and heavy manufacturing operations requiring reliable pulling and lifting components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and capable of supporting the intended load. 2. Precisely position the stock sheet according to design specifications, ensuring proper alignment for lifting or pulling mechanisms. 3. Securely fasten the stock sheet using appropriate high-strength, corrosion-resistant hardware (e.g., grade 8 bolts, stainless steel washers), ensuring all connections are torqued to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-strength fasteners for attachment. | Always utilize fasteners rated for the anticipated load and constructed from materials compatible with 304 stainless steel to prevent galvanic corrosion and ensure structural integrity. |
| Mounting on a surface that cannot withstand the full operational load. | Thoroughly assess and verify the load-bearing capacity of the installation structure prior to mounting to prevent catastrophic failure. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty winch anchor plates, Custom lifting rig components, Reinforcement plates for industrial cranes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||