This 304 stainless steel stock sheet is engineered for robust performance in corrosive industrial settings. Its substantial gauge and premium material ensure exceptional durability for critical plumbing and janitorial infrastructure.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.808" |
| Length | 34" |
| Width | 46" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet boasts a robust 0.808-inch thickness, measuring 34 inches in width and 46 inches in length. Composed of AISI 304 stainless steel, it exhibits superior corrosion resistance, particularly against a wide range of chemicals and atmospheric conditions commonly found in plumbing and janitorial applications. The inherent strength and non-porous surface of this alloy make it an ideal substrate for fabricated components requiring hygiene, sanitation, and resistance to staining or pitting. Its substantial dimensions facilitate efficient fabrication of custom solutions, ensuring longevity and reliable operation in high-traffic, demanding operational zones.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the intended installation area and the stock sheet to remove all debris and contaminants. 2. Carefully position the stock sheet according to the project design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting, riveting) based on structural requirements and environmental factors.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can cause galling or deformation of the stainless steel. | Employ high-quality, sharp cutting tools specifically designed for stainless steel, such as abrasive cut-off wheels or specialized saw blades, to ensure clean and precise cuts without compromising material integrity. |
| Inadequate surface preparation leading to poor adhesion or weld quality. | Always degrease and abrade the surface of the stainless steel before welding or bonding. Use appropriate stainless steel cleaning agents and grit materials to ensure a clean and reactive surface. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of drain pans and sumps, Construction of sanitary barriers and enclosures, Fabrication of industrial shelving and work surfaces in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||