This 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength, making it a premium choice for critical hydraulic system components and fabrication.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.936" |
| Length | 15" |
| Width | 27" |
Specified by design engineers worldwide, this 0.936-inch thick, 15-inch by 27-inch sheet of 304 stainless steel provides superior performance in corrosive environments. The austenitic 304 grade offers excellent formability, weldability, and resistance to a broad range of chemicals and atmospheric conditions. Its non-magnetic nature and inherent strength make it ideal for precision hydraulic manifold fabrication, pump housings, valve bodies, and pressure vessel components where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut to required dimensions using appropriate machining tools for 0.936" thickness. 3. Fabricate or weld according to design specifications, utilizing practices suitable for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel for corrosive hydraulic fluid compatibility. | Always specify 304 or higher-grade stainless steel for hydraulic components exposed to corrosive media. |
| Inadequate preparation before welding, leading to reduced corrosion resistance. | Thoroughly clean weld areas and use appropriate welding consumables for 304 stainless steel to maintain its passivation layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Corrosive Fluid Containment, High-Pressure Component Machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||