Engineered for superior performance in demanding environments, this 304 stainless steel stock sheet offers exceptional strength and corrosion resistance. Its robust dimensions make it suitable for custom fabrication in critical pulling and lifting systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.822" |
| Length | 39" |
| Width | 48" |
Specified by design engineers worldwide, this 0.822" thick stock sheet is manufactured from premium 304 stainless steel, renowned for its excellent tensile strength, ductility, and superior resistance to corrosion and pitting in various atmospheric and chemical environments. The precise dimensions of 39" in length and 48" in width allow for efficient material utilization in custom fabrication of structural components, reinforcement plates, and specialized rigging hardware within pulling and lifting applications, ensuring long-term durability and operational integrity under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Prepare the sheet for cutting, bending, or welding according to fabrication drawings. 3. Integrate the fabricated component into the pulling or lifting system, ensuring all connections are secure and meet load-bearing requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-stress applications. | Always select stock sheet thickness that meets or exceeds the calculated load requirements and safety factors for the intended pulling or lifting operation. |
| Inadequate surface preparation before welding. | Thoroughly clean the weld area to remove any contaminants, oils, or passivation layers to ensure strong, defect-free welds. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of heavy-duty lifting eye plates, Reinforcement gussets for pulley systems, Structural components for industrial hoists and winches.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||