This 304 stainless steel stock sheet provides superior strength and corrosion resistance for demanding pulling and lifting applications. Its precise dimensions ensure compatibility with various structural needs.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.278" |
| Length | 23" |
| Width | 46" |
Manufactured under strict quality controls, this 0.278-inch thick stock sheet boasts a generous 23-inch width and 46-inch length, fabricated from premium 304 stainless steel. This austenitic alloy offers exceptional tensile strength, yield strength, and a high degree of formability, making it ideal for environments requiring resistance to corrosion, oxidation, and general wear. Its non-magnetic properties further enhance its utility in specialized lifting and pulling assemblies where magnetic interference is a concern. The precise dimensional tolerances ensure consistent performance and integration into complex systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity before use. 2. Securely anchor the sheet to the primary structural load-bearing components. 3. Ensure all connection points are properly torqued and reinforced as per engineering specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet in environments with high chloride concentrations without considering passivation. | Ensure appropriate passivation treatments are applied if the operating environment has significant chloride exposure to maintain corrosion resistance. |
| Exceeding the stated load-bearing capacity without proper engineering analysis. | Always adhere to documented load limits or conduct thorough engineering calculations before applying stress beyond the specified design parameters. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Reinforcement plates for lifting points, Custom fabricated structural components for material handling, Wear plates in heavy-duty pulling mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||