This robust 304 stainless steel stock sheet is engineered for superior durability and corrosion resistance in high-traffic plumbing and janitorial environments. Its substantial thickness and large dimensions provide excellent structural integrity.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.492" |
| Length | 44" |
| Width | 20" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures a nominal 0.492 inches (12.5 mm) in thickness, with a precise length of 44 inches (1118 mm) and a width of 20 inches (508 mm). The 304 grade offers exceptional resistance to a wide range of corrosive media, making it ideal for environments exposed to moisture, cleaning chemicals, and varying pH levels. Its high tensile strength and formability allow for a multitude of fabrication processes, ensuring reliable performance in demanding applications. The annealed condition further enhances its workability and ductility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and condition against project requirements. 2. Prepare surface for installation, ensuring it is clean, dry, and structurally sound. 3. Fabricate and install sheet according to approved engineering drawings and local building codes, utilizing appropriate fastening and sealing methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient fasteners or improper sealing techniques, leading to potential leaks or structural failure. | Employ a comprehensive fastening pattern and high-quality, chemically resistant sealants as specified by engineering design or best practices for stainless steel installations. |
| Allowing prolonged contact with dissimilar metals in corrosive environments, leading to galvanic corrosion. | Ensure proper isolation between 304 stainless steel and other metals, particularly in wet or chemical-exposed areas, using non-conductive gaskets or coatings. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of splash guards and wall panels in commercial restrooms and kitchens., Substrates for countertops and work surfaces in janitorial closets and service areas., Fabrication of durable drainage channels and trench covers in industrial plumbing systems..
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||