This 304 stainless steel stock sheet is engineered for demanding pulling and lifting applications. Its robust construction and superior corrosion resistance ensure reliable performance in challenging industrial settings.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.073" |
| Length | 27" |
| Width | 42" |
Precision-manufactured to tight tolerances, this 0.073-inch thick stock sheet boasts dimensions of 27 inches in length and 42 inches in width. Fabricated from high-grade 304 stainless steel, it offers exceptional tensile strength and resistance to corrosion, pitting, and crevice corrosion, making it ideal for environments exposed to moisture, chemicals, or saltwater. Its formability and weldability facilitate custom fabrication for specific pulling and lifting apparatus, including custom plates, reinforcements, and structural components within marine, chemical processing, and heavy industrial sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to remove any debris or contaminants. 2. Position the stock sheet according to the project's design specifications. 3. Secure the stock sheet using appropriate fasteners and welding techniques as dictated by the application's load requirements and environmental conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive environments, leading to premature failure due to rust and degradation. | Always select 304 stainless steel for applications exposed to moisture, chemicals, or saltwater to ensure long-term durability and integrity. |
| Underestimating the required thickness for specific load-bearing pulling or lifting tasks. | Consult engineering load charts or consult with a qualified engineer to determine the appropriate sheet thickness for your specific pulling and lifting requirements. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pulling plates for winches and hoists, Reinforcement for lifting slings and rigging hardware, Marine anchor point fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||