A robust 304 stainless steel stock sheet, engineered for critical pressure and temperature control systems. Its superior corrosion resistance and dimensional stability ensure reliable performance in harsh environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.381" |
| Length | 38" |
| Width | 33" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers a nominal thickness of 0.381 inches (9.68 mm), with precise dimensions of 38 inches (965.2 mm) in length and 33 inches (838.2 mm) in width. Fabricated from annealed 304 stainless steel, it exhibits excellent formability, weldability, and superior resistance to a broad spectrum of corrosive media, making it ideal for high-pressure vessels, heat exchangers, and critical control valve components where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface integrity against design specifications. 2. Prepare edges for welding or forming according to required tolerances and joint design. 3. Implement appropriate cutting, bending, and welding procedures, ensuring adherence to industry standards for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge preparation leading to weld defects. | Ensure all edges are clean, free of contaminants, and beveled according to the specified weld joint design before fabrication. |
| Using incorrect cutting tools causing excessive heat input and material distortion. | Utilize appropriate cutting methods (e.g., waterjet, laser, or plasma cutting with controlled parameters) to minimize heat-affected zones and material deformation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting and manifold systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||