Engineered for robust performance, this 304 stainless steel stock sheet offers exceptional strength and corrosion resistance. Its substantial thickness and dimensions make it a critical component for secure and reliable pulling and lifting operations in harsh environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.932" |
| Length | 27" |
| Width | 24" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet provides a foundation of reliability for critical applications. Measuring 0.932 inches thick, 27 inches in length, and 24 inches in width, it's fabricated from high-grade 304 stainless steel, renowned for its excellent tensile strength, yield strength, and superior resistance to a wide range of corrosive agents, including atmospheric conditions, many organic and inorganic chemicals, and food processing environments. This material composition ensures long-term durability and structural integrity even under significant mechanical stress, making it ideal for custom fabrication of lifting lugs, heavy-duty plates, or structural reinforcement in marine, industrial, and chemical processing sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from contaminants. 2. Precisely mark the desired mounting locations for fasteners based on the sheet's dimensions and intended load distribution. 3. Securely fasten the stock sheet using appropriately rated hardware, ensuring even torque distribution to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate fastener selection for the load capacity. | Always select fasteners (bolts, screws) with a shear and tensile strength that exceeds the maximum anticipated load of the assembly, considering the sheet's inherent strength. |
| Improper surface preparation leading to premature corrosion at the mounting points. | Thoroughly clean and degrease both the stock sheet's mounting surface and the receiving substrate. Consider using a barrier compound if galvanic corrosion is a concern with dissimilar metals. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting lugs and eyes, Heavy-duty mounting plates for machinery in corrosive environments, Structural reinforcement in marine or offshore applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||