This robust 304 stainless steel stock sheet offers exceptional strength and corrosion resistance. Precisely manufactured to stringent standards, it is ideal for fabricating custom pulling and lifting components.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.473" |
| Length | 16" |
| Width | 26" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet provides a reliable foundation for demanding industrial applications. With precise dimensions of 0.473 inches (12.01 mm) thickness, 16 inches (406.4 mm) length, and 26 inches (660.4 mm) width, it meets the rigorous demands of the pulling and lifting category. The inherent properties of 304 stainless steel, including its excellent tensile strength, ductility, and superior resistance to oxidation and corrosion from various atmospheric and chemical environments, ensure longevity and performance in harsh operational settings. This material is crucial for creating custom sheaves, brackets, lifting plates, and other critical components where structural integrity and environmental resilience are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess the intended application and required structural load capacity. 2. Cut the stock sheet to the precise dimensions using appropriate industrial cutting tools (e.g., plasma cutter, waterjet). 3. Fabricate and integrate the cut sheet into the pulling or lifting assembly, ensuring all welding and fastening procedures adhere to relevant industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly rated material for the intended load. | Always verify the material's tensile strength and suitability against the maximum anticipated load and environmental conditions for the specific pulling or lifting application. |
| Inadequate edge preparation or welding procedures, compromising structural integrity. | Ensure all cut edges are deburred and prepared according to welding specifications. Employ certified welding techniques and qualified personnel for all fabrication steps. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting eyes, Heavy-duty pulling brackets, Sheave manufacturing, Reinforcement plates for lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||