This 0.557" thick 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, making it a superior choice for demanding pressure and temperature control environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.557" |
| Length | 42" |
| Width | 38" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet measures 0.557 inches in thickness, 42 inches in length, and 38 inches in width. The 304 grade stainless steel provides excellent resistance to oxidation and corrosion, with a typical composition including a minimum of 18% chromium and 8% nickel. This material is well-suited for applications involving moderate to high temperatures and pressures, such as in heat exchangers, pressure vessel components, and industrial piping systems where material integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Accurately cut the sheet to the required dimensions using appropriate metalworking tools. 3. Fabricate and install according to relevant engineering drawings and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or deformation. | Employ shear blades, plasma cutters, or waterjet cutting for clean, precise edges. |
| Inadequate surface preparation before welding or joining. | Thoroughly degrease and remove any oxide layers from the edges to be joined. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ductwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||