This 304 stainless steel stock sheet is engineered for robust hydraulic systems. Its superior corrosion resistance and dimensional stability make it ideal for critical fluid power components.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.851" |
| Length | 37" |
| Width | 46" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet offers exceptional dimensional integrity for critical hydraulic components. With a thickness of 0.851 inches, a length of 37 inches, and a width of 46 inches, it provides ample material for fabrication. The 304 stainless steel alloy ensures excellent resistance to a wide range of corrosive fluids and environmental conditions commonly found in hydraulic applications, preventing premature degradation and maintaining system performance. This sheet is suitable for manufacturing hydraulic manifold blocks, accumulator components, and specialized fluid handling equipment where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended hydraulic fluid and operating environment. 2. Machine to precise dimensions using appropriate tooling for stainless steel. 3. Ensure proper surface finish to prevent fluid contamination and leakage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel not resistant to hydraulic fluids. | Always specify 304 stainless steel or higher for hydraulic components exposed to corrosive media. |
| Inadequate surface finish leading to seal failure. | Achieve a Ra value suitable for the specific sealing application during machining. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Accumulator Body Construction, Specialty Fluid Power Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||