This 304 stainless steel stock sheet is engineered for robust performance in high-pressure hydraulic systems. Its superior corrosion resistance and mechanical strength make it ideal for fabricating critical components requiring exceptional durability.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.804" |
| Length | 17" |
| Width | 37" |
A high-performance industrial component, this 304 stainless steel stock sheet boasts precise dimensions of 0.804 inches in thickness, 17 inches in length, and 37 inches in width. Fabricated from Type 304 stainless steel, it offers excellent resistance to a wide range of corrosive media commonly found in hydraulic fluid systems. This grade provides a balanced combination of formability, weldability, and strength, ensuring reliable performance in demanding environments. Its non-magnetic properties and resistance to pitting and crevice corrosion make it a preferred choice for critical hydraulic manifolds, valve bodies, and structural elements where longevity and integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free from any contaminants. 2. Precisely cut or machine the sheet to the required component dimensions. 3. Deburr all edges thoroughly to prevent stress risers and facilitate smooth fluid flow.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for hydraulic components exposed to corrosive fluids. | Always select materials like 304 stainless steel that offer inherent corrosion resistance for hydraulic applications. |
| Inadequate edge preparation after cutting, leading to potential fatigue points. | Thoroughly deburr and smooth all cut edges to maintain material integrity and prevent premature failure. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Valve Bodies, Sealing Surfaces in High-Pressure Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||