This 304 stainless steel stock sheet provides robust material for custom hydraulic component fabrication. Offering superior corrosion resistance and mechanical strength, it ensures longevity in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.277" |
| Length | 25" |
| Width | 20" |
Engineered for reliability and performance, this 0.277-inch thick sheet of 304 stainless steel offers exceptional tensile strength and yield strength, crucial for high-pressure hydraulic applications. Its inherent passivation layer provides excellent resistance to oxidation and chemical attack, making it ideal for systems exposed to diverse fluids and environmental conditions. The 25-inch by 20-inch dimensions allow for efficient fabrication of manifolds, valve bodies, and other critical hydraulic sub-assemblies, minimizing material waste and machining time. Rigorous quality control ensures consistent material properties and dimensional accuracy.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications against application requirements. 2. Precisely cut the sheet to the desired component dimensions using appropriate machining tools. 3. Prepare edges for welding or assembly, ensuring cleanliness and proper fit-up.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized sheet material for critical hydraulic components. | Always ensure sufficient material thickness and surface area to accommodate design stresses and fluid flow requirements, referencing relevant hydraulic design standards. |
| Inadequate surface preparation before welding or joining. | Thoroughly degrease and remove any surface contaminants or oxides from the 304 stainless steel to ensure strong, corrosion-resistant welds and seals. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold fabrication, Custom valve body construction, Hydraulic system component prototyping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||