Engineered from premium 304 stainless steel, this robust stock sheet is designed for high-stress pulling and lifting applications. Its precise dimensions and corrosion resistance ensure reliable performance in challenging environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.157" |
| Length | 35" |
| Width | 25" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers exceptional durability and resistance to corrosion, making it a premier choice for critical pulling and lifting assemblies. Measuring 0.157 inches in thickness, 35 inches in length, and 25 inches in width, it adheres to stringent industrial standards. The austenitic structure of 304 stainless steel provides excellent tensile strength, weldability, and formability, ensuring reliable performance under significant load and in environments prone to moisture or chemical exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Position the stock sheet according to the design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fasteners and welding techniques as dictated by the application's engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incorrect fasteners for load-bearing applications. | Always refer to the specific engineering drawings and material load ratings to select fasteners with adequate tensile strength and shear resistance. |
| Insufficient edge preparation or improper welding techniques, compromising structural integrity. | Ensure proper beveling and cleaning of weld edges and utilize welding procedures recommended for 304 stainless steel to achieve full penetration and a strong joint. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting lugs and attachment points, Reinforcement plates for rigging equipment, Structural components in marine and offshore lifting gear.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||