Engineered for robust performance in corrosive environments, this 304 stainless steel stock sheet provides exceptional strength and durability for critical pulling and lifting operations.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.813" |
| Length | 24" |
| Width | 12" |
Trusted by engineers across multiple sectors, this 0.813-inch thick, 24-inch long, and 12-inch wide stock sheet is manufactured from premium 304 stainless steel. Known for its excellent tensile strength and superior corrosion resistance, it is ideal for environments exposed to moisture, chemicals, and saltwater. The inherent non-magnetic properties and hygienic surface make it suitable for food processing, marine, and chemical handling equipment where contamination control and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Accurately measure and mark cutting lines according to project requirements. 3. Utilize appropriate cutting tools designed for thick stainless steel, such as abrasive saws or plasma cutters, ensuring proper safety protocols are followed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for thick stainless steel, leading to excessive wear and poor cut quality. | Employ high-quality abrasive cut-off wheels or plasma torches specifically designed for cutting materials of this thickness and hardness. |
| Failure to account for material expansion/contraction due to heat during cutting, resulting in inaccurate dimensions. | Allow for slight over-measurement and employ cooling methods during cutting to minimize thermal distortion and maintain dimensional accuracy. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Fabrication for Lifting Fixtures, Reinforcement Plates in Marine Environments, Componentry for Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||