This robust 304 stainless steel stock sheet is engineered for superior performance in demanding pulling and lifting applications. Its substantial thickness and corrosion resistance ensure longevity and reliability in harsh industrial settings.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.629" |
| Length | 37" |
| Width | 25" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers exceptional strength and durability. With a nominal thickness of 0.629 inches (16 mm), a length of 37 inches (939.8 mm), and a width of 25 inches (635 mm), it provides a substantial platform for robust fabrication. The 304 stainless steel composition ensures excellent resistance to corrosion, oxidation, and a wide range of chemicals, making it ideal for marine, food processing, chemical handling, and general heavy-duty structural components where hygiene and longevity are paramount. Its inherent mechanical properties support significant load-bearing capabilities for pulling and lifting mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before fabrication. 2. Securely position the sheet for cutting, drilling, or welding operations. 3. Integrate into the designed pulling or lifting apparatus according to engineering drawings and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always specify and use 304 stainless steel or equivalent for applications exposed to moisture, chemicals, or saltwater to prevent rust and premature failure. |
| Underestimating the required thickness for the load capacity. | Consult engineering load charts or perform stress analysis to ensure the 0.629" thickness is sufficient for the intended pulling or lifting forces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting lugs and brackets, Reinforcement plates for heavy-duty machinery, Components for marine-grade pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||