This robust 304 stainless steel stock sheet is engineered for critical pulling and lifting operations. Its substantial thickness and superior corrosion resistance make it ideal for extreme environments and heavy-duty use.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.965" |
| Length | 39" |
| Width | 29" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a substantial 0.965-inch thickness, ensuring exceptional load-bearing capacity and structural integrity. Measuring 39 inches in length and 29 inches in width, its generous dimensions provide ample surface area for a wide range of fabrication needs. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to atmospheric conditions, many organic and inorganic chemicals, and food-processing environments, make this sheet suitable for demanding marine, industrial, and chemical processing applications where longevity and safety are paramount. This material offers good formability and weldability for custom solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Position the stock sheet according to the specific application design, ensuring proper alignment with any attachment points. 3. Securely fasten the stock sheet using appropriate high-strength, corrosion-resistant hardware, torqueing to manufacturer specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard hardware that will corrode in a marine or chemical environment. | Always use 316 stainless steel or other high-grade, corrosion-resistant fasteners that are compatible with 304 stainless steel and the operating environment. |
| Overlooking the need for proper edge finishing after cutting, which can create stress risers. | Deburr and smooth all cut edges to prevent premature failure and ensure a safe working surface. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of heavy-duty lifting lugs and brackets, Reinforcement plates for structural supports in corrosive environments, Components for specialized marine or offshore pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||