This 304 stainless steel stock sheet offers superior corrosion resistance and durability, making it ideal for demanding plumbing and janitorial environments. Its robust 0.262" thickness ensures structural integrity for various fabrication needs.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.262" |
| Length | 28" |
| Width | 22" |
Manufactured under strict quality controls, this 0.262" thick stock sheet is composed of high-grade 304 stainless steel, renowned for its excellent tensile strength, formability, and resistance to rust and corrosion. The precise dimensions of 28" in length and 22" in width provide ample material for fabrication in critical plumbing installations, custom janitorial fixtures, and sanitary equipment where hygiene and longevity are paramount. This material meets industry standards for use in wet environments and areas prone to chemical exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the sheet based on design requirements. 2. Employ appropriate cutting tools (e.g., shear, plasma cutter) suitable for 0.262" stainless steel. 3. Deburr all cut edges to ensure a smooth finish and prevent injury.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material damage or poor edge quality. | Utilize tools specifically designed for cutting stainless steel of this gauge to ensure clean, precise cuts and maintain material integrity. |
| Failing to deburr edges after cutting, creating safety hazards. | Always thoroughly deburr all edges to remove sharp metal fragments and ensure a safe handling and installation process. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Sink Fabrication, Protective Wall Paneling, Industrial Drain Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||