This 304 stainless steel stock sheet is engineered for critical pressure and temperature control applications. Its robust construction ensures reliability and longevity in demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.268" |
| Length | 13" |
| Width | 22" |
Built to exacting engineering tolerances, this 0.268" thick stock sheet measures 13" in length and 22" in width, providing a precise and consistent material for fabrication. Composed of 304 stainless steel, it exhibits excellent corrosion resistance to a wide range of aggressive media, low magnetic permeability, and good formability, making it suitable for applications involving elevated temperatures and pressures where material integrity is paramount. Typical uses include custom manifold fabrication, heat exchanger components, and pressure vessel liners.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants prior to cutting or forming. 2. Utilize appropriate cutting tools and techniques for 0.268" thick stainless steel to maintain dimensional accuracy. 3. Implement proper welding procedures for 304 stainless steel to preserve corrosion resistance at the weld zone.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick stainless steel, leading to material deformation or poor edge quality. | Employ specialized carbide or diamond-tipped blades designed for cutting hardened stainless steel, ensuring slow feed rates and adequate cooling. |
| Inadequate surface preparation before welding, resulting in compromised weld integrity and potential corrosion initiation. | Thoroughly degrease and mechanically clean the weld area with stainless steel brushes and abrasive pads, avoiding carbon steel tools. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Pressure Vessel Components, Heat Exchanger Plates and Liners, High-Temperature Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||