This robust 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength, ideal for fabrication in high-pressure hydraulic applications. Its precise dimensions ensure seamless integration into custom designs.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.503" |
| Length | 47" |
| Width | 17" |
A high-performance industrial component, this 304 stainless steel stock sheet is engineered to withstand the rigorous demands of hydraulic systems. Measuring 0.503 inches in thickness, 47 inches in length, and 17 inches in width, it provides a substantial material volume for fabrication. The 304 stainless steel alloy offers superior resistance to a wide range of corrosive media, including water, atmospheric conditions, and many organic and inorganic chemicals, making it suitable for environments where fluid compatibility and longevity are paramount. Its excellent formability and weldability allow for complex component manufacturing, ensuring reliability in critical hydraulic fluid power applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the stock sheet to the required dimensions for the hydraulic component using appropriate cutting tools. 2. Fabricate the component, ensuring all welds and seals meet the specified tolerances for the hydraulic system. 3. Thoroughly clean the fabricated component to remove any contaminants before installation into the hydraulic circuit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel not suited for hydraulic fluid compatibility. | Always specify and verify 304 stainless steel (or higher grade if required) for all hydraulic components to prevent corrosion and material degradation. |
| Inaccurate cutting or fabrication leading to leaks or poor performance. | Employ precise measurement and cutting techniques, and adhere strictly to design tolerances during fabrication to ensure proper sealing and function. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold blocks, Custom hydraulic cylinder components, High-pressure hydraulic fluid reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||