This 304 stainless steel stock sheet is engineered for demanding pressure and temperature control applications. Its robust 0.656" thickness and significant 16" x 47" dimensions offer superior structural integrity and adaptability for custom fabrication.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.656" |
| Length | 16" |
| Width | 47" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers exceptional corrosion resistance, strength, and formability suitable for high-stakes pressure and temperature control systems. With a precise thickness of 0.656 inches, a length of 16 inches, and a width of 47 inches, it meets stringent industry standards for material purity and dimensional accuracy. Ideal for components in chemical processing, food and beverage manufacturing, and HVAC systems requiring reliable performance under thermal and mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against project specifications. 2. Prepare mating surfaces for welding or fastening, ensuring cleanliness and absence of contaminants. 3. Fabricate and install according to approved engineering drawings and relevant welding/joining procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for 304 stainless steel. | Utilize 308L or 309L filler metal for TIG or MIG welding to maintain corrosion resistance and mechanical properties. |
| Insufficient preparation of edges for joining, leading to weld defects. | Ensure proper beveling and edge preparation (e.g., V-groove, U-groove) to achieve full weld penetration and integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel components, Heat exchanger plates, High-temperature ducting, Corrosion-resistant enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||