This 304 stainless steel stock sheet offers exceptional performance in high-pressure and high-temperature environments. Its robust construction ensures reliability for critical control system components.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.887" |
| Length | 12" |
| Width | 40" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet boasts a precise thickness of 0.887 inches, a width of 40 inches, and a length of 12 inches. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of chemicals and its high tensile strength at elevated temperatures, make it ideal for manufacturing pressure vessel components, heat exchanger plates, and critical sealing surfaces within temperature-controlled systems. Its non-magnetic nature and weldability further enhance its versatility in demanding industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before fabrication. 2. Accurately cut to the required dimensions using appropriate cutting tools. 3. Deburr all edges thoroughly to prevent stress risers and facilitate subsequent joining or assembly processes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge deformation or work hardening. | Employ high-quality abrasive or laser cutting equipment specifically designed for stainless steel to maintain material integrity. |
| Inadequate edge preparation leading to premature failure at stress points. | Always meticulously deburr and, if necessary, radius all cut edges to distribute stress effectively. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger component manufacturing, High-temperature fluid control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||