This robust 304 stainless steel stock sheet is engineered for extreme reliability in pulling and lifting applications. Its substantial dimensions and superior material properties ensure consistent performance under significant loads.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.795" |
| Length | 31" |
| Width | 20" |
A high-performance industrial component, this 304 stainless steel stock sheet measures 0.795 inches in thickness, 31 inches in length, and 20 inches in width. Fabricated from premium 304 stainless steel, it exhibits exceptional tensile strength, corrosion resistance, and durability, making it ideal for environments exposed to moisture, chemicals, or abrasive conditions. The precise dimensions and material composition guarantee structural integrity and predictable performance in rigorous industrial operations, including custom fabrication for specialized lifting equipment and reinforcement in heavy machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Prepare mounting surfaces, ensuring they are clean, level, and capable of supporting the intended load. 3. Securely fasten the stock sheet using appropriate industrial-grade hardware, considering load distribution and vibration mitigation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners instead of corrosion-resistant ones when integrating with stainless steel. | Always utilize 304 or 316 grade stainless steel fasteners to prevent galvanic corrosion and maintain material integrity. |
| Ignoring load-bearing capacity calculations for the specific application. | Thoroughly calculate and confirm the sheet's suitability for the maximum anticipated load, factoring in safety margins and potential dynamic forces. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Fabrication of Lifting Slings and Fixtures, Reinforcement Plates for Heavy Machinery, Structural Components in Marine Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||