Engineered for extreme environments, this 0.315-inch thick 304 stainless steel stock sheet offers superior strength and corrosion resistance. Ideal for custom pulling and lifting fixture fabrication.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.315" |
| Length | 28" |
| Width | 43" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet meets stringent performance requirements for demanding pulling and lifting operations. Its 0.315" (8mm) nominal thickness, combined with a 28" (711mm) length and 43" (1092mm) width, provides a substantial platform for fabricating robust components. The 304 grade stainless steel offers excellent resistance to a wide range of corrosive media, ensuring longevity in harsh marine, industrial, and chemical processing environments. This material's high tensile strength and yield strength are critical for applications involving significant load-bearing capacities, preventing deformation under stress. Fabrication properties are excellent, allowing for cutting, bending, and welding to custom specifications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is free of debris and surface contaminants before proceeding. 2. Accurately measure and mark the desired cut lines according to fabrication drawings. 3. Utilize appropriate cutting tools (e.g., plasma cutter, waterjet) designed for stainless steel of this thickness, maintaining coolant flow to prevent thermal distortion. 4. Perform necessary bending or forming operations using calibrated equipment, ensuring compliance with material stress limits. 5. Weld using compatible stainless steel filler materials and appropriate inert gas shielding (e.g., Argon) to maintain corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper coolant, leading to excessive heat and potential sensitization of the stainless steel. | Employ plasma cutters or waterjet systems with adequate coolant flow, or use specialized stainless steel cutting blades with lubrication. |
| Inadequate weld preparation, such as leaving mill scale or oil residue on the surface, compromising weld integrity and corrosion resistance. | Thoroughly clean the weld joint area with stainless steel brushes and degreasers before welding. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated lifting points and brackets, Reinforcement plates for heavy-duty pulling equipment, Subsea and offshore structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||