Engineered from high-grade 304 stainless steel, this stock sheet provides exceptional corrosion resistance and structural integrity for critical hydraulic system components. Its precise dimensions ensure reliable performance in demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.108" |
| Length | 47" |
| Width | 44" |
A high-performance industrial component, this 304 stainless steel stock sheet, measuring 0.108 inches in thickness, 47 inches in length, and 44 inches in width, is engineered for superior durability and resistance to corrosive fluids common in hydraulic systems. The inherent properties of 304 stainless steel, including its excellent tensile strength and resistance to pitting and crevice corrosion, make it ideal for fabricating manifold blocks, fluid reservoirs, and structural supports within high-pressure hydraulic circuits. Its uniform thickness and dimensional stability facilitate precise machining and assembly, ensuring leak-free operation and extended service life in challenging industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately measure and mark cut lines based on design specifications. 3. Utilize appropriate cutting tools (e.g., shear, laser, waterjet) to achieve desired shapes. 4. Deburr all cut edges to prevent material stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel for corrosive hydraulic fluids. | Always select corrosion-resistant materials like 304 stainless steel for hydraulic components exposed to aggressive media. |
| Inadequate edge preparation after cutting. | Thoroughly deburr and polish all cut edges to maintain material integrity and prevent premature failure. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Fluid Reservoir Construction, Sealing Surface Machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||