This 0.242" thick 304 stainless steel stock sheet provides exceptional corrosion resistance and formability for demanding pressure and temperature control systems.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.242" |
| Length | 32" |
| Width | 16" |
Manufactured under strict quality controls, this 0.242" gauge stock sheet is fabricated from premium 304 stainless steel, renowned for its superior corrosion resistance, high tensile strength, and excellent weldability. Its 32" length and 16" width offer ample material for custom fabrication in environments subjected to moderate pressures and temperatures. The austenitic structure ensures non-magnetic properties and suitability for a wide range of industrial and commercial applications requiring reliability and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut to the required dimensions using appropriate cutting tools. 3. Fabricate and integrate into the intended pressure or temperature control system according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or deformation. | Utilize carbide-tipped blades or abrasive cutting discs specifically designed for stainless steel. |
| Inadequate surface preparation before welding or joining. | Thoroughly degrease and remove any mill scale or surface oxidation from weld areas. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated pressure vessel components, Heat exchanger plates and baffles, Ducting for high-temperature environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||