Engineered for superior strength and corrosion resistance, this 0.966-inch thick 304 stainless steel stock sheet provides a robust platform for critical pulling and lifting operations where reliability is paramount.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.966" |
| Length | 20" |
| Width | 21" |
Trusted by engineers across multiple sectors, this 0.966" thick 304 stainless steel stock sheet offers exceptional mechanical properties for demanding applications. Its imperial dimensions of 20" length and 21" width, combined with the inherent strength and corrosion resistance of grade 304 stainless steel, make it ideal for fabricating custom lifting hardware, structural reinforcement in marine environments, and heavy-duty pulling mechanisms. The material's excellent weldability and formability allow for tailored solutions in industrial, maritime, and construction settings requiring long-term performance under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess structural load requirements and ensure the sheet's dimensions and material properties meet or exceed these specifications. 2. Prepare the mounting surface, ensuring it is clean, level, and capable of supporting the intended loads. 3. Securely fasten the stock sheet using appropriate high-strength fasteners, adhering to load-bearing calculations and industry best practices for pulling and lifting equipment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate fasteners for the intended load. | Always utilize fasteners rated for the maximum anticipated tensile and shear forces, consulting load charts and engineering specifications. |
| Overlooking the corrosive environment's impact on the stainless steel. | While 304 is corrosion-resistant, verify its suitability for specific aggressive chemical or saltwater environments; consider 316 for more extreme conditions. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom lifting bracket fabrication, Reinforcement plates for heavy machinery, Subsea pulling equipment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||