This robust 304 stainless steel stock sheet provides exceptional strength and corrosion resistance, ideal for fabricating critical hydraulic components and systems requiring long-term reliability and clean operation.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.245" |
| Length | 47" |
| Width | 31" |
Engineered for reliability and performance, this 0.245-inch thick stock sheet is manufactured from premium 304 stainless steel, renowned for its excellent tensile strength, ductility, and superior resistance to a wide range of corrosive media common in hydraulic environments. Its precise dimensions of 47 inches in length and 31 inches in width allow for efficient material utilization in the fabrication of hydraulic manifolds, pump housings, valve bodies, and fluid reservoirs. The inherent passivity of the 304 alloy ensures hygienic properties and prevents galvanic corrosion when in contact with various hydraulic fluids.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface imperfections or damage. 2. Precisely cut to required dimensions using appropriate cutting tools for stainless steel. 3. Prepare edges for welding or joining processes according to hydraulic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel that will corrode in hydraulic fluid. | Always specify and use 304 or higher-grade stainless steel for hydraulic applications to ensure longevity and prevent contamination. |
| Improper edge preparation leading to weak joints. | Ensure edges are clean, deburred, and properly beveled to match welding procedures for optimal joint integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Pump and Valve Body Construction, Hydraulic Fluid Reservoir Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||